dillo too 73 error

[metal_miracle]

hi i get this error when trying to load either prj or env projects and it wont load the td lod objects..

did try one version whitout object but no diffrence.

and on my other pc too to see if it was just my pc..

[ElDiablo (Paul)]

I assume that you are talking about Dillo Too .973?

Have you downloaded the MXU object res files yet? If not...you can get them here - http://www.twisteddirt.com/mxuresfiles.php

I have been beta testing this one, and I know that Laurie uploaded it like yesterday and was going to announce it formally in the forums, but he must have gotten side-tracked on something else.

I think that it should open ANY project file...not sure if it will open env's that weren't created by it, never tested that one out. But I've been using it to work on my current project without any errors for the last week. This looks like a problem for Laurie. But if you can't open ANYTHING in it...then I've got to assume that it's either because you don't have all the MXU res files...OR you are trying to open a file that it doesn't recognize for whatever reason.

[mcm2boys]

I could use a bit more info, can you maybe send me an ENV or the set of PRJ files to try out. Obviously i have never had this problem. If i read you right you haven't managed to load any tracks at all into the new D2?

What type of track are you trying to load?

What are TD lod objects?


Laurie

[ElDiablo (Paul)]

What are TD lod objects?

Objects made with the SLT assistant that have 2 Levels of Detail (2 meshes). I think that Andrew made them, not entirely sure. I don't have any of them.

[metal_miracle]

i use mostly high defenition tracks

[ElDiablo (Paul)]

Damn...I knew I needed to beta test one of those! Sorry M/M...I didn't check out Hi-Def tracks in the new D2. 

[metal_miracle]

another problem i have about 300 objects but only 10 show in dillo 73

[mcm2boys]

Sorry I didn't test large maps because I don't have my usual pc since I moved So i don't  have all my tools on my laptop.

I guess that i need to look at that.

You mean they don't  show in the list or in the track?

Laurie

[metal_miracle]

here you see only a few objects but where is the rest

[MDx_Wayne]

For what is worth (no offence meant MM) I wouldn't loose any sleep over hi-res.  A large part of the community shun them do to increased lag on so many machines.  They just don't run well, especially in the zone.  There are just a lot of folks out there running PCI graphics and keyboard input.  That and hi-res is an un-playable combination.  Like I said, for what is is worth.  Please don't take it personal MM.

Oh...BTW, Paul on your sig which is quite good, the guy sanding and waving appears to have a right arm that is 4-1/2 feet long   .  Bet that suit wasn't cheap 

Wayne

[metal_miracle]

For what is worth (no offence meant MM) I wouldn't loose any sleep over hi-res.  A large part of the community shun them do to increased lag on so many machines.  They just don't run well, especially in the zone.  There are just a lot of folks out there running PCI graphics and keyboard input.  That and hi-res is an un-playable combination.  Like I said, for what is is worth.  Please don't take it personal MM.

Oh...BTW, Paul on your sig which is quite good, the guy sanding and waving appears to have a right arm that is 4-1/2 feet long   .  Bet that suit wasn't cheap 

Wayne

wow you are so way off you dont need good graphics card i have manny video cards a ..   2mb 2d  ..   2 voodoo 2 12mb   ... voodoo3 16 mb ... riva tnt2 32mb ... asus v7700 32mb g2 ... msi  fx5900  128..   ...ati 9550 256mb...   

and every card from voodoo 2 to ati card i have run mcm2 so smooth but not the new nvida cards form  gefroce 4 and up

(I can even run mcm2 on my 2m card)


now to the reason i am using high def  first off i make an envoirement that is more than riding in circle
and in order to use leveller to its fulles i need all the resulution i can get so bigger the better..
if you ever seen the track i make you see that i often make fmx,sx,nat in same track..

[ElDiablo (Paul)]

Oh...BTW, Paul on your sig which is quite good, the guy sanding and waving appears to have a right arm that is 4-1/2 feet long   .  Bet that suit wasn't cheap 

Wayne

LOL...Wayne...that's the Stock MCM2 Rider model...and all I did was move the arm around in max and do a render. No lengthening of the arms was done and absolutely NO animal testing! Well ok...a little animal testing, but only on the second tuesday of each week! lol

Believe it or not guys MCM2 depends a LOT more on the CPU and memory than it does the video card. Sure, with a better video card, you get better graphics overall. But render speed is not the bottle-neck that gives you lag on tracks.

M/M...good to know about the Nvidia cards...although I don't think Glen (VMX_PanicRev) who has a new 6800GT has any problems running MCM2 with any tracks at all. But I'm trying to make a decision on what video card to buy after Xmas...and I think I'm going to go with an ATI X850XT Platinum Edition. I looked all over the web and from what I can tell nobody's card is running the kind of speeds that that one is stock!

(Core Clock= 540MHz; Memory Clock= 1180MHz plus it's got 16 pipelines instead of 8 like the new Nvidia cards)

Plus, I have an ASUS P4P800E Deluxe motherboard that doesn't support PCI-Express cards...so the 6800 series is as far as I can go with the Nvidia cards. So I think I'll be buying the ATI. 

[MDx_Wayne]

Well... tell me, is there anything I can tell peeps who are laggin' real bad on hi-res stuff?  What kind of advice could I pass on to get the lag out?

[ElDiablo (Paul)]

Unfortunately any advice to 'get the lag out' would most likely involve the word "UPGRADE". Anyone with anything less than a 1.5Ghz CPU or 512Mb of Ram (pc2700 or above) will most likely need to upgrade to get past the 'hump'. Really...if you're an avid gamer, you're going to NEED to have a more robust computer to even be able to run the newer games.

Of course, there are the exhisting MCM2 recommended tweaks that help to be able to run MCM2 better...but MCM2 is not the only 'fish' in the sea. Dell and other hi-volume computer builders most all have $300 pc packages and they pretty much all would run MCM2 with hi-def tracks.

It's also worth it to note that some lag problems can be caused by simply needing to update drivers. Most people update their video drivers but never think about updating AUDIO drivers. Believe it or not...I've had first-hand experience with outdated audio drivers. They can cause your whole pc to crash. Just ask Cr! So updating ALL drivers (video, audio, monitor, and bios) on a regular basis is advisable and may be the only obsticle keeping some people from enjoying their PC's to the utmost.

Actually OC is they guy to ask about this stuff...he's the one guy I can say most definately knows PC's inside-out.

[DirtTwister]

I would have to say that most lag is caused by extra stuff running on your computer.   A hi-def track causes your cpu, memory system, hard disk, and video card to do more work and it may put over the edge with the extra stuff that you are running.  Running a higher resolution and frame rate will cause you to notice problems also.  There are many problems with your computer setup that could cause random pauses.  If you have ever tried to create a new folder in Explorer and had a lengthy wait for it to time out because of something it was doing, you wil understand that those same pauses can happen while playing a game.  So it's important that your system functions well when not playing a game.

PC's running without using vsync will cause their frame rates to be quite variable.   Your PC may not have any problem running 70 FPS sync'ed with your monitor but have a hard time keeping up with running an unleashed 150 or more fps.  Running a consistent 70 will seem less laggy than running something which has frame rates that vary from say 80 to 200.    Even though the 80-200 setup will always run faster than the 70 it's inconsistency will make you feel like you are having  problems.

I keep mine synced with my monitor.  I also run 800x600 resolution. When I race online I run  640x480.

Runing twice the resolution of 640x480 (1280x960) is actually 4 times the work.  800x600 is 1.5 times the work of 640x480.

My best advice is to have a clean reliable running system, use vsync, run minimum resolution that you are happy with, and lower the level of detail in the game until the lag goes away.  If you aren't happy with the levels that you have to run at to get clean frame rates than you have to upgrade.

I have an AMD 3200+, 400FSB, 1Gig PC3200, ATI 9800 Pro.  Runs sweet all the time full detail, shadows, and particles.

Bruce

[cR]

Believe it or not...I've had first-hand experience with outdated audio drivers. They can cause your whole pc to crash. Just ask cR! So updating ALL drivers (video, audio, monitor, and bios) on a regular basis is advisable and may be the only obsticle keeping some people from enjoying their PC's to the utmost.

Yep he's right... Paul helpt me figure my crashing problem out (wich I had for about 8 months, ALL 3d games would make the system reboot), after me and Paul where looking on the ATI site for hours turned out to be the audio drivers :S

I hope a fix comes soon for the High Res tracks in D2... I just started working on one... wanted to open in D2... acces violation popped up to...

[mcm2boys]

Sorry for the delay in replying but i am busy at work at the moment and in the middle of buying a house so time is short. I just opened a 6x6 track with no problem so something else is causing the problem. I am going to take a look at it today and i hope i can get back to you soon.

MM not sure why you're objects aren't showing up, i'll look into that as well, I see you have some other folders under the objects resource tree, are they in there? Resources are searced for in the UserModels folder and any of the first level of folder under the UserModels folder.

My take on the HiDef tracks is that they are basically the same as 6x6 tracks (Enduro,Baja etc) but more of the polys in the terrain are rendered in any one frame. So there is about twice as many polys to render, which you could compensate for by using less objects/trees if it is a very high poly count track. Or as Bruce say reduce your detail settings..


Laurie


MM or cR can you send me a copy of the files that are causing this error, i've traced the error message and it isn't telling me very much.

Can you also link me to the TD_lod models to test with since i can't find anything that looks like this description on the TD site or Extreme's site.

email address: mcm2boys@netscape.net  - Note: use .net not .com else i won't receive it and you won't get a bounce notification.

[metal_miracle]

http://www.twisteddirt.com/mcm2objMQ.php here is the pennant object that i was talking about..

gone try upload a zip because i cant send so big files over email.

[cR]

I've mailed you my project Like I said in the mail, can't really call it HiDef, just a stunt map with low grid (2.0).. no splining etc. done yet... so I guess D2 can't load stuntmaps?

[mcm2boys]

Thanks cR i have it. I made a 2.0 grid stunt and it loaded, i also made a std stunt map and it also loaded, so i really don't see why it isn't working for you. I didn't have a spline or objects and a stock sky, but since all those things work in other formats i don't see why the HiDefs should cause these problems.

Can you guys load Sx or Nats with this version of D2?

I'll try out cR's track and see what happens. I just hope it's not a hardware issue, i'm using nVidia on my laptop ..

Laurie